Product Family

High-Security Fencing Systems

High-security boundaries combine climb-resistant panels or pales with controlled fixings, suitable posts, access gates and project-selected perimeter toppings.

System Selection

How to Specify This Product Family

Start with the security objective and finished boundary height, then coordinate the panel or pale construction, post face, anti-tamper connection, gate openings, foundations and any topping or detection interface on one approved system schedule.

Products and Components

Compare the Complete Fence Systems

Use each product page to confirm construction, interfaces, inspection points, packing scope and quotation inputs.

358 Anti-Climb High-Security Fence
High-Security Fencing

358 Anti-Climb High-Security Fence

Dense 76.2 x 12.7 mm welded mesh panels for high-security boundaries where visibility, anti-climb geometry and controlled fixing details are required.

Wire diameter
4.0 mm
Mesh aperture
76.2 x 12.7 mm
System specData centers
Review system spec
Steel Palisade Fencing System
High-Security Fencing

Steel Palisade Fencing System

Cold-formed W-section steel pales bolted to horizontal rails for industrial and high-security perimeter construction.

Pale profile
W-section steel pale
Pale thickness
2.0 / 2.5 / 3.0 mm options
System specUtilities
Review system spec
Airport Perimeter Security Fence
High-Security Fencing

Airport Perimeter Security Fence

An integrated welded-mesh boundary system combining rigid panels, Y-extension posts and continuous security topping for airfield perimeter planning.

Panel system
Rigid welded mesh
Post extension
Symmetrical Y arm
System specAirfields
Review system spec
Anti-Tamper Security Fixings
Posts, Gates & Security Accessories

Anti-Tamper Security Fixings

Spider clips, carriage bolts and break-off shear nuts for rigid mesh and high-security fence attachment systems.

Shear nuts
M6 / M8 / M10 options
Bolts
Carriage and security-drive options
System spec358 fence systems
Review system spec
Industrial Cantilever Sliding Gates
Posts, Gates & Security Accessories

Industrial Cantilever Sliding Gates

RHS-framed cantilever gates with matched welded-mesh infill and counterbalance geometry for controlled industrial vehicle access.

Clear opening
3.0 m to 12.0 m project range
Frame
Structural RHS steel
System specLogistics parks
Review system spec

Comparison Framework

Decisions That Change the System

Keep these decisions together so quotations represent the same fence scope.

Boundary construction
358 welded mesh, formed steel palisade or a project-selected rigid panel system
Connection security
Post face, clamp plate or flat bar, bolt path and anti-tamper fasteners
Access control
Pedestrian and vehicle gates coordinated with the adjoining fence construction
Top and site interfaces
Clear zones, toppings, detection equipment and maintenance access defined by the project

Applications

Plan the Fence Around the Site

View All Applications
Critical Infrastructure Perimeter Security

System RFQ

Request a Comparable System Quotation

Send the threat objective, boundary drawing, finished height, selected panel or pale, post mounting, gate schedule, topping interface, inspection scope and destination.

Project Configuration

Scroll to Top