Anti-Tamper Security Fixings

Posts, Gates & Security Accessories

Anti-Tamper Security Fixings

Security fixings must match the panel wire, post face, clamp or spider clip and required tool resistance. Bolt length and thread size should be confirmed from the complete connection stack.

Product family: Fence Posts, Gates and Security Fixings

Project supply for: fence installers, security contractors, distributors and maintenance procurement teams. AP Fencing prepares the product, matched-component, inspection and packing scope for a comparable quotation.

Shear nuts
M6 / M8 / M10 options
Bolts
Carriage and security-drive options
Clips
Stamped steel spider clips
358 fence systemsRigid mesh panelsSecurity gatesRestricted-access boundaries
Request Pricing and Technical DetailsOpen Data Sheet

Final dimensions, tolerances, finish and accessory compatibility are confirmed in the quotation and approved order documents.

Selection Priorities

Key Anti-Tamper Security Fixings Selections

  • Panel wire and post connection detail
  • M6, M8 or M10 thread selection
  • Spider clip, clamp plate or carriage-bolt arrangement
  • A2, A4 or coated carbon-steel material
ItemTypical SelectionProject Options
Shear nutsM6 / M8 / M10 optionsA2 / A4 stainless options
BoltsCarriage and security-drive optionsLength selected for post system
ClipsStamped steel spider clipsProfile matched to wire and post
AnchorsMechanical post anchorsChemical anchor option by substrate

Selection Answer

How Do You Match Anti-Tamper Fixings to a Fence?

Match the fixing from the complete connection stack: panel wire, clip or clamp, post face, bolt path, thread, washers and nut. For replacement work, provide a sample or approved interface drawing; for new work, pack identified kits by panel, post or bay count with an agreed spare quantity.

358 panel connections
Check clip or clamp geometry against the narrow mesh and the selected post face.
Double wire connections
Confirm clearance around paired horizontal wires before selecting clips or clamp bars.

Complete Assembly

Coordinate Clips, Bolts, Washers and Shear Nuts

Specify the interfaces together so product dimensions, supports, fixings and accessories do not conflict during installation.

Clip
Stamped four-hook spider clip matched to mesh wires
Bolt
Carriage or security-drive bolt sized to the post connection
Nut
Break-off shear nut with permanent conical base
Anchor
Mechanical or chemical post anchor where specified

System Quote

Need a Complete Anti-Tamper Fixing Kit?

Request Product Pricing

Product, Application and Packing

Review Fastener Interfaces, Installed Clips and Kit Packing

Anti-Tamper Security Fixings construction and connection detail
Detail
Anti-Tamper Security Fixings installed in a suitable perimeter application
Application
Anti-Tamper Security Fixings components prepared with export packing protection
Packing

Inspection Scope

Verify Thread, Length, Material and Interface Fit

  • Confirm thread size, bolt length and material grade
  • Check clip geometry against the panel and post sample
  • Trial-assemble one complete connection stack
  • Count and seal kits by fence bay or post quantity
Review the quality-control workflow

Packing Scope

Count and Identify Fixings by Panel or Post Set

For export, fixings can be counted into sealed cartons or drums and palletized. Kits can be identified by fence and post configuration when the required schedule is supplied. Final quantities and packing units are confirmed in the order scope.

State bundle-weight limits, unloading method, accessory identification and required shipment records in the RFQ.

Buyer Guides

Prepare the Anti-Tamper Security Fixings Specification

View All Guides
358 Fence Posts and Security Fixings: What Must Match

Buyer Questions

Security Fastener and Compatibility Questions

Final selections remain subject to the approved quotation, drawings and project requirements.

How is the correct shear-nut size selected?

The thread must match the selected bolt or stud, while the material grade should match the exposure and connection specification. Confirm the complete fastener set rather than the nut alone.

Can security fixing kits be packed by fence bay?

Yes. Kits can be counted and labeled by bay, post or installation zone when the required schedule is provided before packing.

How are shear nuts and fasteners matched to an existing fence?

Confirm thread size, bolt length, clamp thickness, post profile, tool access and material grade. Use a sample or approved interface drawing for replacement work.

Can complete fixing kits be packed by panel or post count?

Yes. Provide panel, post and clamp quantities plus the spare percentage so clips, bolts, washers and shear nuts can be packed as identified kits.

Which surface finish should be specified?

Select the final coating or material grade for the exposure environment, service conditions, color and agreed inspection requirement.

What information is needed for an accurate quotation?

Provide configuration, dimensions, quantity, finish or material grade, mounting method, accessories, destination, inspection documents and target delivery schedule.

Continue the Selection

Related Panels, Posts and Security Accessories

Compare All Products
Compare the Fence Posts, Gates and Security FixingsCritical Infrastructure Perimeter Security
358 Anti-Climb High-Security Fence
High-Security Fencing

358 Anti-Climb High-Security Fence

Dense 76.2 x 12.7 mm welded mesh panels for high-security boundaries where visibility, anti-climb geometry and controlled fixing details are required.

Wire diameter
4.0 mm
Mesh aperture
76.2 x 12.7 mm
System specData centers
Review system spec
Double Wire Rigid Fence 868 / 656
Rigid Panel Systems

Double Wire Rigid Fence 868 / 656

Rigid 2D mesh panels with one vertical wire between paired horizontal wires for industrial, public-space and transport boundaries where higher panel rigidity is required.

868 construction
2 x 8.0 mm horizontal + 6.0 mm vertical
656 construction
2 x 6.0 mm horizontal + 5.0 mm vertical
System specIndustrial sites
Review system spec
Base-Plated Fence Posts
Posts, Gates & Security Accessories

Base-Plated Fence Posts

RHS or round fence posts welded to pre-drilled structural flanges for direct anchoring to suitable concrete substrates.

Base flange
150 x 150 x 8 mm / 200 x 200 x 10 mm
Post profile
60 x 60 / 80 x 80 mm RHS
System specConcrete slabs
Review system spec

Product RFQ

Request a Quote for Anti-Tamper Security Fixings

Complete the system-specific fields so construction, supports, fixings, finish and packing can be compared on the same basis.

Security Fixing Kit Configuration

Scroll to Top