Critical Infrastructure Perimeter Security

High-Security Application

Critical Infrastructure Perimeter Security

Coordinate anti-climb panel geometry, security fixings, access gates, toppings and clear-zone requirements for data centers, substations and restricted infrastructure.

Selection Priorities

Define Threat Level, Fence Height and Clear-Zone Interfaces

  • Threat level and climb resistance
  • Controlled fastener access
  • Gate openings and emergency access
  • Clear zones, detection systems and topping interfaces

Inputs for Quotation

Provide the 358 Panel, Post, Gate and Topping Schedule

  1. 01
    Fence height and total boundary length
  2. 02
    Panel aperture and wire construction
  3. 03
    Embedded or base-plated post system
  4. 04
    Gate schedule and security topping
  5. 05
    Required inspection and document scope

System Decision Matrix

Map Data Center and Substation Boundary Zones to Each System

Separate public approaches, restricted fence runs, vehicle openings, utility interfaces and higher-risk zones before selecting one repeated boundary detail.

Boundary ZoneTypical SystemConfirm Before Quotation
Anti-climb boundary358 mesh with controlled fixingsConfirm height, clear zone and topping interface
Post securityRHS post with clamp plate or flat barLimit exposed removable fasteners
Vehicle accessCantilever gate with matched dense-mesh infillCoordinate opening, tail and control interfaces
Top protectionCranked extension, strands or concertina systemCheck local rules and safe maintenance access

Implementation Interfaces

Coordinate Detection, Gate, Foundation and Maintenance Interfaces

  • Separate perimeter fence, gate and detection responsibilities on the approved drawing.
  • Define the inspection stage for mesh, posts, security fixings, finish and packing.
  • Identify installation zones so posts, panels, gates and hardware can be packed in sequence.

Inspection and Packing

Specify Security-Fence Inspection and Traceability Records

Define the dimensional checks, finish checks, representative assembly, packing protection, component identification and loading records required for the project.

Review quality and export planning

System Components

Compare 358 Mesh, Palisade, Gates and Perimeter Toppings

Compare All Products
358 Anti-Climb High-Security Fence
High-Security Fencing

358 Anti-Climb High-Security Fence

Dense 76.2 x 12.7 mm welded mesh panels for high-security boundaries where visibility, anti-climb geometry and controlled fixing details are required.

Wire diameter
4.0 mm
Mesh aperture
76.2 x 12.7 mm
System specData centers
Review system spec
Steel Palisade Fencing System
High-Security Fencing

Steel Palisade Fencing System

Cold-formed W-section steel pales bolted to horizontal rails for industrial and high-security perimeter construction.

Pale profile
W-section steel pale
Pale thickness
2.0 / 2.5 / 3.0 mm options
System specUtilities
Review system spec
Airport Perimeter Security Fence
High-Security Fencing

Airport Perimeter Security Fence

An integrated welded-mesh boundary system combining rigid panels, Y-extension posts and continuous security topping for airfield perimeter planning.

Panel system
Rigid welded mesh
Post extension
Symmetrical Y arm
System specAirfields
Review system spec
Concertina Razor Wire Security Topping
Razor Wire & Perimeter Toppings

Concertina Razor Wire Security Topping

Clipped concertina coils manufactured from razor strip around a high-tensile core wire for controlled perimeter-topping configurations.

Razor profile
BTO-22 typical
Coil diameter
450 / 600 / 700 / 900 mm options
System specSecure walls
Review system spec
Anti-Climb Wall Spikes
Razor Wire & Perimeter Toppings

Anti-Climb Wall Spikes

Heavy-gauge stamped steel spike strips for mounting to concrete walls, precast panels and suitable fence-top rails.

Base material
2.0 / 2.5 mm heavy-gauge steel
Spike height
60 / 110 / 150 mm options
System specConcrete walls
Review system spec
Anti-Tamper Security Fixings
Posts, Gates & Security Accessories

Anti-Tamper Security Fixings

Spider clips, carriage bolts and break-off shear nuts for rigid mesh and high-security fence attachment systems.

Shear nuts
M6 / M8 / M10 options
Bolts
Carriage and security-drive options
System spec358 fence systems
Review system spec
Industrial Cantilever Sliding Gates
Posts, Gates & Security Accessories

Industrial Cantilever Sliding Gates

RHS-framed cantilever gates with matched welded-mesh infill and counterbalance geometry for controlled industrial vehicle access.

Clear opening
3.0 m to 12.0 m project range
Frame
Structural RHS steel
System specLogistics parks
Review system spec

Specification Guides

Prepare the Product and Interface Schedule

View All Guides
358 Fence Panel Size, Wire Diameter and Mesh Opening Guide358 Fence Posts and Security Fixings: What Must MatchSteel Palisade Fencing: Pale Profiles, Rails, Posts and FixingsAirport Perimeter Fence Planning: Panels, Toppings and Gates

Solution RFQ

Request a Critical-Infrastructure Fence System Quotation

Include the security objective, boundary drawing, finished height, gate schedule, post mounting, topping interface, inspection scope and destination.

Project Configuration

Scroll to Top