Industrial Cantilever Sliding Gates

Posts, Gates & Security Accessories

Industrial Cantilever Sliding Gates

Cantilever gates require a clear opening, counterbalance tail, support-post arrangement and suitable foundation zone. Gate geometry, infill and automation interfaces should be approved from a project drawing.

Product family: Fence Posts, Gates and Security Fixings

Project supply for: fencing contractors, gate installers, system integrators and industrial project buyers. AP Fencing prepares the product, matched-component, inspection and packing scope for a comparable quotation.

Clear opening
3.0 m to 12.0 m project range
Frame
Structural RHS steel
Infill
Matched welded mesh
Logistics parksData centersFactoriesUtility entrances
Request Pricing and Technical DetailsOpen Data Sheet

Final dimensions, tolerances, finish and accessory compatibility are confirmed in the quotation and approved order documents.

Selection Priorities

Key Industrial Cantilever Sliding Gates Selections

  • Clear vehicle opening and available run-back space
  • Gate height, frame section and mesh infill
  • Manual or automation-ready operation
  • Support foundation and safety-device interfaces
ItemTypical SelectionProject Options
Clear opening3.0 m to 12.0 m project rangeSingle or coordinated openings
FrameStructural RHS steelSection sizes by gate calculation
InfillMatched welded mesh358 or rigid panel infill
OperationManual or automation-readyControls quoted separately
FinishGalvanized and powder-coated optionsRAL color selection

Selection Answer

What Site Information Controls a Cantilever Gate?

A cantilever gate requires the clear opening plus run-back space for the counterbalance tail and support hardware. Confirm ground levels, support-post and foundation zones, frame and infill, receiving detail, operating method, controls and safety interfaces before the gate drawing is approved.

358 fence infill
Coordinate when the gate must continue a narrow-mesh high-security boundary.
Double wire infill
Compare where the gate must align with a double-wire rigid-panel run.

Complete Assembly

Coordinate the Gate Leaf, Posts, Hardware and Controls

Specify the interfaces together so product dimensions, supports, fixings and accessories do not conflict during installation.

Leaf
RHS structural frame with matched fence infill
Tail
Counterbalance section sized for the clear opening
Support
Guide posts, roller carriages and receiving post
Options
Manual hardware or automation-ready brackets and interfaces

System Quote

Need a Complete Gate Opening Schedule?

Request Product Pricing

Product, Application and Packing

Review Frame Construction, Operating Space and Packed Hardware

Industrial Cantilever Sliding Gates construction and connection detail
Detail
Industrial Cantilever Sliding Gates installed in a suitable perimeter application
Application
Industrial Cantilever Sliding Gates components prepared with export packing protection
Packing

Inspection Scope

Verify Opening, Frame and Hardware Interfaces

  • Check overall frame geometry, squareness and welds
  • Confirm clear opening and counterbalance dimensions
  • Trial-fit rollers, guides and receiving hardware
  • Protect finished surfaces in a steel transport cradle
Review the quality-control workflow

Packing Scope

Protect Gate Frames and Identify Hardware Sets

For export, gate leaves and support frames can be protected in steel transport cradles. Rollers, guides and hardware can be packed as identified installation kits. Final lifting and transport protection are confirmed in the order scope.

State bundle-weight limits, unloading method, accessory identification and required shipment records in the RFQ.

Buyer Guides

Prepare the Industrial Cantilever Sliding Gates Specification

View All Guides
Cantilever Sliding Gate Specification Checklist for Industrial Sites

Buyer Questions

Sliding Gate and Hardware Questions

Final selections remain subject to the approved quotation, drawings and project requirements.

How much run-back space does a cantilever gate need?

Run-back space must accommodate the clear opening plus the counterbalance tail and safety clearances. Provide the site plan and opening schedule for project calculation.

Does automation-ready mean the motor is included?

Not automatically. Automation-ready normally means the frame and interfaces can accept an agreed drive system. Motors, controls and safety devices must be listed separately in the quotation.

Which opening and runback dimensions are required?

Provide the clear opening, gate height, runback space, ground level, frame infill, support detail and operating method. Define automation and safety interfaces in the approved gate design.

Can tracks, rollers, posts, locks and automation interfaces be included?

Yes. Supply the opening schedule and operating requirements so frames, hardware, stops and controls can be coordinated.

Which surface finish should be specified?

Typical selections include Galvanized and powder-coated options. Select the final coating or material grade for the exposure environment, service conditions, color and agreed inspection requirement.

What information is needed for an accurate quotation?

Provide configuration, dimensions, quantity, finish or material grade, mounting method, accessories, destination, inspection documents and target delivery schedule.

Continue the Selection

Related Fence Systems and Access-Control Applications

Compare All Products
Compare the Fence Posts, Gates and Security FixingsCritical Infrastructure Perimeter SecurityIndustrial & Logistics Perimeter Fencing
358 Anti-Climb High-Security Fence
High-Security Fencing

358 Anti-Climb High-Security Fence

Dense 76.2 x 12.7 mm welded mesh panels for high-security boundaries where visibility, anti-climb geometry and controlled fixing details are required.

Wire diameter
4.0 mm
Mesh aperture
76.2 x 12.7 mm
System specData centers
Review system spec
3D Curved Welded Mesh Fence
Rigid Panel Systems

3D Curved Welded Mesh Fence

Single-wire welded panels with continuous V reinforcement folds for commercial, industrial and infrastructure boundaries.

Wire diameter
4.0 mm / 5.0 mm
Mesh aperture
50 x 200 mm
System specFactories
Review system spec
Double Wire Rigid Fence 868 / 656
Rigid Panel Systems

Double Wire Rigid Fence 868 / 656

Rigid 2D mesh panels with one vertical wire between paired horizontal wires for industrial, public-space and transport boundaries where higher panel rigidity is required.

868 construction
2 x 8.0 mm horizontal + 6.0 mm vertical
656 construction
2 x 6.0 mm horizontal + 5.0 mm vertical
System specIndustrial sites
Review system spec

Product RFQ

Request a Quote for Industrial Cantilever Sliding Gates

Complete the system-specific fields so construction, supports, fixings, finish and packing can be compared on the same basis.

Security Sliding Gate Configuration

Scroll to Top