Product Data Sheet
3D Curved Welded Mesh Fence Technical Data Sheet
V-bend panel construction, mesh and wire options, posts, clips, coating and installation details for 3D welded mesh fence.
Download PDFProduct Definition
3D Curved Welded Mesh Fence
Use 3D welded mesh where a cost-controlled rigid panel needs additional stiffness from horizontal V folds. Panel height determines the number and position of folds, so the panel, post and clip schedule must be approved together.
| Item | Typical Selection | Project Options |
|---|---|---|
| Wire diameter | 4.0 mm / 5.0 mm | 4.5 mm and project-specific options |
| Mesh aperture | 50 x 200 mm | Alternative grid sizes by quotation |
| Panel width | 2500 mm typical | Custom bay planning |
| V-fold configuration | Based on panel height | Fold count confirmed on approved drawing |
| Post system | Peach post or square post | Embedded or base-plated |
System Components
Request a Complete System Quote
- Panel
- Single-wire welded mesh with repeated horizontal V folds
- Post
- Peach post or RHS square post
- Fixing
- Profile clip, spider clip or project-selected clamp
- Options
- Pedestrian gates, vehicle gates and base-plated posts
Inspection Scope
Confirm Acceptance Before Production
- Measure wire, aperture, panel width and height
- Confirm fold count and fold position against drawing
- Check post and clip fit before packing
- Inspect coating coverage at folds and welds
Project Quotation